High wear resistance 150-DHD340 DTH drilling bit with high efficiency
- Product Description
- 1 Applications: Quarry, mining & well drilling
- 2 Bit Diameter: 150mm
- 3 Shank type: DHD/SD/QL/MISSON
- 4 Color: As request
- 5 Face Shape: Flat, Concave, Covex & drop center face
- 6 Carbide button shape: Parabolic, Ballistic, Sharp & Domed
- 7 Material: Tungsten carbide and hard alloy steel
| Diameter|| Button|
|Air Holes||Weight (kgs)|
| Drill bits for DHD340 hammers|
| 125||4 15/16||8x16||10x13||38||2||8.9|
Concave Face The all-round application bit face special for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
Convex Face For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
Flat Face This kind of face shape is suitable for very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
Double Gauge Face This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
Low pressure 165-CIR150 drill bit with long service life
Down the hole 115-CIR110 DTH hammer bits for dth hammer drilling
146-DHD340 Symmetric drill bits with casing tube
Drilling wells and driving piles high pressure DTH drill bit 203-DHD360
D165 high pressure DTH drill bit with DHD350 hammer for mining
Black Threaded DTH Drill Rods Shock Resistance For Water Well Drilling